Uncertainty propagation across scales for composite laminates
Uncertainties are classified as either aleatory (inherent randomness in the system) or epistemic (due to partial knowledge of the problem and parameters). Aleatory (random) refers to fibre and matrix characteristics, manufacturing variations, among others; whereas epistemic is associated with the type of the methods considered. These uncertainties are currently accounted for through a conservative approach to composite structural design. Incorporating uncertainties in the design of CFRP structures for aerospace vehicle design will lead to less conservative factors (without compromising safety) and a reduction of design cycle times through reduced experimental testing. Probabilistic methods can be used to quantify these variabilities. Probability distribution functions (PDF) may be established for all uncertain parameters, giving the possibility to correlate several parameters. The outcome may be interpreted in a statistical sense, and the probability of each output quantity depends on the input probabilities and their correlations. It is vital that these inputs are somehow validated in order to allow a proper statistical interpretation, which is usually neglected, and assumptions are made on the input PDFs.
This PhD project aims at overcoming current limitations with regards to quantify uncertainties related to material and manufacturing parameters and investigate how they affect and propagate across length scales. The considered scales are: micro, meso and macro.
It is aimed to develop a bottom-up stochastic multiscale model taking uncertainties into account using the finite element (FE) method. The utilization of metamodels is aimed to train the FE models towards developing computationally efficient frameworks.
The outcomes from the framework will allow understanding the failure and damage mechanisms of composite laminates under several loading scenarios.
UK nationals only
Aerospace Engineering overview
Doing a PhD in the School of Mechanical and Aerospace Engineering is a highly rewarding experience. You will carry out your research in a friendly and supportive environment, supervised by academics who are leaders in their field, using well-equipped laboratories and research facilities, alongside students from all over the world. At any time we have around 100 students enrolled on a PhD. The School has a vibrant PhD student mentoring programme and a student led Research Culture Committee.
The School’s research is focused around six interconnected research themes: Advanced Manufacturing and Processing, Future Aircraft, Composite Materials and Structures, Simulation Technologies, Clean Energy and Biomaterials and Biomechanics.
PhD opportunities are available in a wide range of subjects aligned to the specific expertise of our PhD supervisors. Many are linked with leading companies and organisations.
Research students are encouraged to play a full and active role in the research activities undertaken within the School. Students attend international conferences and participate in academic and industrial networks worldwide.
- The School has strategic partnerships with Rolls-Royce and Wrights supported by multiple large programmes (funders EPSRC, Innovate-UK, Advanced Propulsion Centre etc). There are opportunities for cutting edge, impactful PhDs within vibrant teams.
- The school also partners with a number of leading companies on a range of research challenges, including: Airbus, Artemis Technologies, Caterpillar, Ferrari, Ford, Jaguar Land Rover
- PhDs contribute to major centres, including: Advanced Manufacturing Innovation Centre (AMIC), Northern Ireland Advanced Composites and Engineering Centre (NIACE), Polymer Processing Research Centre (PPRC), Northern Ireland Technology Centre (NITC)
- The School has well equipped laboratories and great research facilities. PhD students share offices alongside postdoctoral staff. The School has Research Culture Committee to enhance the research environment of the School and support PhD students.
Employment after the Course
Many of our PhD graduates have moved into academic and research roles in Higher Education while others go on to play leading roles in industry, industry or become entrepreneurs.
People teaching you
Dr Trevor Robinson
Doctoral Programme Director
Mech & Aerospace Engineering
You will carry out leading research under the guidance of your supervisory team. A full time student will normally complete in three years (up to a maximum of four), or part time over six years (up to a maximum of eight).
Research will usually be in one of the key, interlinked research themes in the School, and the subtopics they cover, include:-
Advanced Manufacturing and Processing - cost modelling, ergonomics, intelligent control, laser processing, life cycle analysis, material characterisation, mechatronics, parallel kinematic machines, polymer processing, robotics and ultra-precision manufacturing.
Future Aircraft - aero engines, aerodynamics, aeroelasticity, aircraft operations, design and analysis, optimisation and structural testing
Composite Materials and Structures -damage mechanics and crashworthiness, material characterisation, multifunctional composites and nano-enhanced composites
Simulation Technologies - FEA/CFD/EFG/DES/MD, kinematic modelling, meshing, multiscale/Multiphysics, optimisation, simulation intent, systems modelling, uncertainty quantification, virtual testing and design visual analytics and big data
Clean Energy - biofuels, catalysis, life cycle assessment, power systems, turbomachinery and waste management
Biomaterials and Biomechanics - biomimetics, material characterisation, mechanobiology and medical devices.
Also, over the course of study, you can attend postgraduate skills training organised by the Graduate School, or other internal and external training courses organised through your supervisor.
The minimum academic requirement for admission to a research degree programme is normally an Upper Second Class Honours degree from a UK or ROI HE provider, or an equivalent qualification acceptable to the University. Further information can be obtained by contacting the School.
For information on international qualification equivalents, please check the specific information for your country.
English Language Requirements
Evidence of an IELTS* score of 6.0, with not less than 5.5 in any component (*taken within the last 2 years) is required.
International students wishing to apply to Queen's University Belfast (and for whom English is not their first language), must be able to demonstrate their proficiency in English in order to benefit fully from their course of study or research. Non-EEA nationals must also satisfy UK Visas and Immigration (UKVI) immigration requirements for English language for visa purposes.
For more information on English Language requirements for EEA and non-EEA nationals see: www.qub.ac.uk/EnglishLanguageReqs.
If you need to improve your English language skills before you enter this degree programme, INTO Queen's University Belfast offers a range of English language courses. These intensive and flexible courses are designed to improve your English ability for admission to this degree.
|Northern Ireland (NI) 1||£TBC|
|Republic of Ireland (ROI) 2||£TBC|
|England, Scotland or Wales (GB) 1||£TBC|
|EU Other 3||£22,700|
1 EU citizens in the EU Settlement Scheme, with settled or pre-settled status, are expected to be charged the NI or GB tuition fee based on where they are ordinarily resident, however this is provisional and subject to the publication of the Northern Ireland Assembly Student Fees Regulations. Students who are ROI nationals resident in GB are expected to be charged the GB fee, however this is provisional and subject to the publication of the Northern Ireland Assembly student fees Regulations.
2 It is expected that EU students who are ROI nationals resident in ROI will be eligible for NI tuition fees, in line with the Common Travel Agreement arrangements. The tuition fee set out above is provisional and subject to the publication of the Northern Ireland Assembly student fees Regulations.
3 EU Other students (excludes Republic of Ireland nationals living in GB, NI or ROI) are charged tuition fees in line with international fees.
All tuition fees quoted are for the academic year 2021-22, and relate to a single year of study unless stated otherwise. Tuition fees will be subject to an annual inflationary increase, unless explicitly stated otherwise.
Aerospace Engineering costs
There are no specific additional course costs associated with this programme.
Additional course costs
Depending on the programme of study, there may also be other extra costs which are not covered by tuition fees, which students will need to consider when planning their studies . Students can borrow books and access online learning resources from any Queen's library. If students wish to purchase recommended texts, rather than borrow them from the University Library, prices per text can range from £30 to £100. Students should also budget between £30 to £100 per year for photocopying, memory sticks and printing charges. Students may wish to consider purchasing an electronic device; costs will vary depending on the specification of the model chosen. There are also additional charges for graduation ceremonies, and library fines. In undertaking a research project students may incur costs associated with transport and/or materials, and there will also be additional costs for printing and binding the thesis. There may also be individually tailored research project expenses and students should consult directly with the School for further information.
How do I fund my study?1.PhD Opportunities
Find PhD opportunities and funded studentships by subject area.2.Funded Doctoral Training Programmes
We offer numerous opportunities for funded doctoral study in a world-class research environment. Our centres and partnerships, aim to seek out and nurture outstanding postgraduate research students, and provide targeted training and skills development.3.PhD loans
The Government offers doctoral loans of up to £26,445 for PhDs and equivalent postgraduate research programmes for English- or Welsh-resident UK and EU students.4.International Scholarships
Information on Postgraduate Research scholarships for international students.
Funding and Scholarships
The Funding & Scholarship Finder helps prospective and current students find funding to help cover costs towards a whole range of study related expenses.
How to Apply
Find a supervisor
If you're interested in a particular project, we suggest you contact the relevant academic before you apply, to introduce yourself and ask questions.
To find a potential supervisor aligned with your area of interest, or if you are unsure of who to contact, look through the staff profiles linked here.
You might be asked to provide a short outline of your proposal to help us identify potential supervisors.