Chemical Engineering uses chemistry, mathematics, biology and physics to provide an integrated approach to understanding the changes which take place in processes, from molecular to global scale, and to create methods which can change chemical or physical composition, energy content, structure, or physical state, ie mathematics and science in action. The subject also involves the application of knowledge to the design, development and operation of plants that process chemical and related products. It borders and overlaps on areas such as mechanical, electrical and civil engineering, chemistry, materials science and biology
Chemical Engineering Sandwich Degree highlights
Chemical Engineering is ranked 8th in the UK in the Guardian University Guide 2017
- Opportunities to study abroad under the Erasmus exchange programme and Study USA are available. We also have exchanges with Chalmers Technical University in Gothenburg, Sweden, and with Delft Technical University in Delft, the Netherlands.
- Accredited by the Institution of Chemical Engineers.
- We regularly consult and develop links with a large number of employers including, for example, Warner-Chilcott (international pharmaceutical company), Almac, Invista, Seagate, and Johnson Matthey who are members of the Industrial Advisory board for the course.
- The UK’s only combined Chemistry and Chemical Engineering School – this includes a common curriculum in the first Semester which offers the possibility of transfers between the departmental subjects. The interface between science and engineering provides a unique environment for teaching and research
Introduction All degrees are modular, with six modules (or the equivalent in half-modules) each year. Students take a range of modules in engineering, chemistry and science. To obtain professional accreditation, students must follow a defined pathway. Stage 1 Students take several Chemical Engineering modules as well as modules in Chemistry, Mathematics and Electrical Engineering.
Stage 1 courses are outlined below:
Introduction to Chemical Products & Processes
Heat, Mass & Momentum Transfer
Maths for Chemists & Engineers
Stage 2 Students extend their knowledge of Chemical Engineering and study associated subjects such as computer-aided design and applications, laboratory practice, and professional studies.
Stage 2 courses are outlined below:
Introduction to Reaction Engineering
Process Heat Transfer
Safety and Design Codes
Fluid and Particle Mechanics
Computer Aided Design (C.A.D.) & Simulation
Professional Studies 2
Stage 3 Placement Year Stage 4 Comprises more advanced Chemical Engineering modules, various modules covering aspects of management and professional studies, an in-depth design project and an optional research project.
Note: the School has also introduced a new Engineering Chemistry degree which covers core elements of both chemistry and chemical engineering, and will prepare students for a wide range of careers. It is available in two options - the MSci or the MEng
Stage 3 courses are outlined below:
Chemical Reaction Engineering
Climate Change & Carbon Management
Research Project (Spring)
Design Project 2
Heat and Mass Transfer
Professional Studies 3
People teaching you
Chem & Chemical Engineering
Professor Rooney is a Professor of Chemical Engineering. He teaches on a range of modules across the pathways and specialises in Sustainable Energy.
Contact Teaching Times
Large Group Teaching 7 (hours maximum)
7 hours of lectures or seminars
Medium Group Teaching 6 (hours maximum)
6 hours of practical classes or workshops each week; Design and research hours will increase as more project work is undertaken at Levels 3-4 (as applicable; there are separate guidelines for the year in Industry)
Personal Study 24 (hours maximum)
22–24 hours studying and revising in your own time each week, including some guided study using handouts, online activities, etc.
Small Group Teaching/Personal Tutorial 2 (hours maximum)
2 hours of tutorials (or later, project supervision; there are separate guidelines for the year in Industry) each week
Learning and Teaching
At Queen’s, we aim to deliver a high quality learning environment that embeds intellectual curiosity, innovation and best practice in learning, teaching and student support to enable student to achieve their full academic potential.
The BEng in Chemical Engineering with a Year in Industry, provides a range of learning experiences which enables students to engage with subject experts and develop attributes and perspectives that will equip them for life and work in a global society. Innovative technologies and a world class library are use to enhance students’ development as independent, lifelong learners.
Examples of the opportunities provided for learning on this course are:
- Design Classes
Design classes and embedded throughout taught modules in Stages 1 to 2. IChemE accredited design modules CHE3013 and CHE3014 are taken at Stage 3, a significant aspects are: problem solving; sustainability, environmental awareness, and safe working practices and transferable skills (such as, report writing, oral presentations, IT, teamwork, critical thought, entrepreneurship).
- E-Learning technologies
Information associated with lectures and assignments is typically communicated via a Virtual Learning Environment (VLE) called Queen’s Online. Opportunities to use IT programmes associated with data manipulation and presentation are embedded in the practicals and the project- based work.
Introduce basic information about new topics as a starting point for further self-directed private study/reading. Lectures also provide opportunities to ask questions, gain some feedback and advice on assessments (normally delivered in large groups to all year group peers).
- Personal Tutor
Undergraduates are allocated a Personal Tutor during Level 1 and 2 who meets with them on several occasions during the year to support their academic and professional development through the discussion of selected topics.
These are essential to the training in this laboratory-based subject area. You will have opportunities to develop technical skills and apply theoretical principles to real-life or practical contexts. Most of the core taught modules at Stages 1 and 2 have practical components associated with them, whilst stage 3 has a double weighted practical module (CHM3015). Typically at stage 1 you would be in the lab for two afternoons and in stages 2 to 3 it is two full days per week.
- Self-directed study
This is an essential part of life as a Queen’s student when important private reading, preparation for seminars / tutorials, writing of laboratory reports can be completed. You are encouraged to undertake private reflection on feedback, and at the later stages undertake independent research using the primary literature to support project work and critically review taught course material.
Significant amounts of teaching are carried out in small groups (typically 6-10 students). These provide an opportunity for students to engage with academic staff who have specialist knowledge of the topic, to ask questions of them and to assess their own progress and understanding with the support of peers. You should also expect to make presentations and other contributions to these groups as well as using them as a route to providing individual feedback.
- Supervised projects
In the final year, you will be expected to carry out a significant piece of research on a topic or practical methodology that you have chosen. You will receive support from a supervisor who will guide you in terms of how to carry out your research. The supervisor and a second academic member of staff will formally meet, interview and review the work at the half way stage, and then provide support in the write up stage, although weekly contact is anticipated in most projects within the School.
Assessments associated with this course are outlined below:
- The way in which you are assessed will vary according to the Learning objectives of each module. Some modules are assessed solely through project work or written assignments. Others are assessed through a combination of coursework and end of semester examinations. Details of how each module is assessed are shown in the Student Handbook which is provided to all students through the VLE and on the school’s own website.
As students progress through their course at Queen’s they will receive general and specific feedback about their work from a variety of sources including lecturers, module co-ordinators, placement supervisors, personal tutors, advisers of study and peers. University students are expected to engage with reflective practice and to use this approach to improve the quality of their work. Feedback may be provided in a variety of forms including:
- Feedback provided via formal written comments and marks relating to work that you, as an individual or as part of a group, have submitted.
- Face to face comment. This may include occasions when you make use of the lecturers’ advertised “office hours” to help you to address a specific query.
- Placement employer comments or references.
- Online or emailed comment.
- General comments or question and answer opportunities at the end of a lecture, seminar or tutorial.
- Pre-submission advice regarding the standards you should aim for and common pitfalls to avoid. In some instances, this may be provided in the form of model answers or exemplars which you can review in your own time.
- Feedback and outcomes from practical classes.
- Comment and guidance provided by staff from specialist support services such as, Careers, Employability and Skills or the Learning Development Service.
- Once you have reviewed your feedback, you will be encouraged to identify and implement further improvements to the quality of your work.
Investment continues to be made in the School of Chemistry and Chemical Engineering extending our range of facilities. The well-equipped research laboratories are augmented by excellent computational facilities and some of the most modern instrumentation available.
In addition to an instrument pool containing a range of infrared and ultra violet / visible spectrometers, a circular dichroism spectrometer and polarimeter, major items of equipment possessed by the School include NMR spectrometers, powder X-ray diffractometer, , Time of Flight Mass Spectrometers, GC / mass spectrometers, Elemental analyser, Thermal analysers F.T. infrared spectrometers, BET, Scanning electron microscope and a range of the most modern facilities for laser-based spectroscopy, including nanosecond pulsed system.
- Design Classes
In addition, to the entrance requirements above, it is essential that you read our guidance below on 'How we choose our students' prior to submitting your UCAS application.Read more Read less
Applications are dealt with centrally by the Admissions and Access Service rather than by the School of Chemistry and Chemical Engineering. Once your application has been processed by UCAS and forwarded to Queen's, an acknowledgement is normally sent within two weeks of its receipt at the University.
Selection is on the basis of the information provided on your UCAS form. Decisions are made on an ongoing basis and will be notified to you via UCAS.
Applicants for the BEng Honours degree in Chemical Engineering offering A-level/BTEC Level 3 qualifications must be able to satisfy the University's General Entrance Requirement; in addition, all candidates should normally have grade C or above in GCSE Mathematics and either Double Award Science (grades CC) or both Chemistry and Physics. Selectors will also check that any specific entry requirements in terms of A-level subjects can be fulfilled.
Offers are normally made on the basis of three A-levels. Two subjects at A-level plus two at AS are also considered. Candidates are not normally asked to attend for interview. The offer for repeat candidates may be one grade higher than for first time applicants. Grades may be held from the previous year.
Applicants offering two A-levels and one BTEC Subsidiary Diploma/National Extended Certificate (or equivalent qualification) will also be considered. Offers will be made in terms of performance in individual BTEC units rather than the overall BTEC grade(s) awarded. Please note that a maximum of one BTEC Subsidiary Diploma/National Extended Certificate (or equivalent) will be counted as part of an applicant’s portfolio of qualifications. The normal GCSE profile will be expected.
Applicants offering other qualifications, such as Higher National Certificates and Diplomas in a relevant subject, will also be considered for admission to Stage 1. There is no Higher National Diploma in Chemical Engineering which would permit consideration for entry to Stage 2.
Applicants offering a Higher National Certificate (HNC) will require an appropriate GCSE profile, which must include grade C or better in GCSE Mathematics. A relevant HNC in Engineering is required, including Analytical Methods. For applicants offering a HNC, the current requirements are successful completion of the HNC with Merits in all units, including Merits in specified units.
For those offering a Higher National Diploma (HND), at least one unit completed in the first year of the HND must be at Merit level. Where offers are made applicants would be expected to achieve Merits in all units assessed in final year, including in specified units.
The information provided in the personal statement section and the academic reference together with predicted grades are noted but these are not the final deciding factors in whether or not a conditional offer can be made. However, they may be reconsidered in a tie break situation in August.
A-level General Studies and A-level Critical Thinking are not normally be considered as part of a three A-level offer and, although they may be excluded where an applicant is taking 4 A-level subjects, the grade achieved could be taken into account if necessary in August/September.
If you are made an offer then you may be invited to a Faculty/School Open Day, which is usually held during the second semester. This will allow you the opportunity to visit the University and to find out more about the degree programme of your choice and the facilities on offer. It also gives you a flavour of the academic and social life at Queen's.
If you cannot find the information you need here, please contact the University Admissions and Access Service (email@example.com), giving full details of your qualifications and educational background.
For information on international qualification equivalents, please check the specific information for your country.
English Language Requirements
An IELTS score of 6.0 with a minimum of 5.5 in each test component or an equivalent acceptable qualification, details of which are available at: http://go.qub.ac.uk/EnglishLanguageReqs
If you need to improve your English language skills before you enter this degree programme, INTO Queen's University Belfast offers a range of English language courses. These intensive and flexible courses are designed to improve your English ability for admission to this degree.
- Academic English: an intensive English language and study skills course for successful university study at degree level
- Pre-sessional English: a short intensive academic English course for students starting a degree programme at Queen's University Belfast and who need to improve their English.
International Students - Foundation and International Year One Programmes
INTO Queen's offers a range of academic and English language programmes to help prepare international students for undergraduate study at Queen's University. You will learn from experienced teachers in a dedicated international study centre on campus, and will have full access to the University's world-class facilities.
These programmes are designed for international students who do not meet the required academic and English language requirements for direct entry.
The INTO progression course suited to this programme is
- International Year One
The INTO progression course suited to this programme is
INTO - English Language Course(QSIS ELEMENT IS EMPTY)
Studying for a chemical engineering degree at Queen’s will assist you in developing the core skills and employment-related experiences that are valued by employers, professional organisations and academic institutions. Graduates from this degree at Queen’s are well regarded by many employers (local, national and international) and over half of all graduate jobs are now open to graduates of any discipline, including chemical engineering.
Chemical Engineering is a vocational degree, with the majority of our graduates pursuing careers in the pharmaceutical, petrochemical, manufacturing and food industries although opportunities are available todevelop careers in a wide range of other sectors.
Our past students have also gained work placement with organisations such as:
Other Employer Links
Many of the research projects within the School have industrial input, and are in collaboration with a wide variety of companies operating in the chemical sector. Given the close working relationships, between industry and the School of Chemistry and Chemical Engineering new opportunities to expand placements, industrial contact and career opportunities are continually developing.
Overall, these initiatives, and Degree Plusin particular, reward the energy, drive, determination and enthusiasm shown by students engaging in activities over-and-above the requirements of their academic studies. These qualities are amongst those valued highly by graduate employers.
Additional Awards Gained(QSIS ELEMENT IS EMPTY)
Prizes and Awards(QSIS ELEMENT IS EMPTY)
Degree plus award for extra-curricular skills
In addition to your degree programme, at Queen's you can have the opportunity to gain wider life, academic and employability skills. For example, placements, voluntary work, clubs, societies, sports and lots more. So not only do you graduate with a degree recognised from a world leading university, you'll have practical national and international experience plus a wider exposure to life overall. We call this Degree Plus. It's what makes studying at Queen's University Belfast special.
Fees and Funding
Northern Ireland (NI) £4,275 England, Scotland or Wales (GB) £9,250 Other (non-UK) EU £4,275 International £20,100
Tuition fee rates are calculated based on a student’s tuition fee status and generally increase annually by inflation. How tuition fees are determined is set out in the Student Finance Framework.
Additional course costs
Depending on the programme of study, there may be extra costs which are not covered by tuition fees, which students will need to consider when planning their studies.
Students can borrow books and access online learning resources from any Queen's library.
If students wish to purchase recommended texts, rather than borrow them from the University Library, prices per text can range from £30 to £100. A programme may have up to 6 modules per year, each with a recommended text.
Students should also budget between £30 to £75 per year for photocopying, memory sticks and printing charges.
Students undertaking a period of work placement or study abroad, as either a compulsory or optional part of their programme, should be aware that they will have to fund additional travel and living costs.
If a final year includes a major project or dissertation, there may be costs associated with transport, accommodation and/or materials. The amount will depend on the project chosen. There may also be additional costs for printing and binding.
Students may wish to consider purchasing an electronic device; costs will vary depending on the specification of the model chosen.
There are also additional charges for graduation ceremonies, examination resits and library fines.
Chemical Engineering Sandwich costs
Students are required to buy a laboratory coat in year 1 at a cost of £15. Students have the option to hire a locker, at a cost of £5 per student per year. Students have the option to join the Institution of Chemical Engineers (IChemE) at a cost of £24 for the duration of the course.
Students undertake a placement in year 3 and are responsible for funding travel, accommodation and subsistence costs. These costs vary depending on the location and duration of the placement. Students may receive payment from their placement provider during their placement year.
How do I fund my study?
There are different tuition fee and student financial support arrangements for students from Northern Ireland, those from England, Scotland and Wales (Great Britain), and those from the rest of the European Union.
Information on funding options and financial assistance for undergraduate students is available at http://www.qub.ac.uk/Study/Undergraduate/Fees-and-scholarships/.
Each year, we offer a range of scholarships and prizes for new students. Information on scholarships available.
Information on scholarships for international students, is available at http://www.qub.ac.uk/International/International-students/International-scholarships/.
How and when to Apply
How to Apply
Application for admission to full-time undergraduate and sandwich courses at the University should normally be made through the Universities and Colleges Admissions Service (UCAS). Full information can be obtained from the UCAS website at: www.ucas.com/apply.
When to Apply
UCAS will start processing applications for entry in autumn 2019 from 1 September 2018.
Advisory closing date: 15 January 2019 (18:00).
Late applications are, in practice, accepted by UCAS throughout the remainder of the application cycle, but you should understand that they are considered by institutions at their discretion, and there can be no guarantee that they will be given the same full level of consideration as applications received by the advisory closing date.
Applicants are encouraged to apply as early as is consistent with having made a careful and considered choice of institutions and courses.
The Institution code for Queen's is QBELF and the institution code is Q75.
Further information on applying to study at Queen's is available at: http://www.qub.ac.uk/Study/Undergraduate/How-to-apply/
After an offer is made this will be notified to applicants through UCAS. Confirmation will be emailed by the Admissions and Access Service and this communication will also include Terms and Conditions (www.qub.ac.uk/Study/TermsandConditions) which applicants should read carefully in advance of replying to their offer(s) on UCAS Track.
Additional Information for International (non-EU) Students
- Applying through UCAS
Most students make their applications through UCAS (Universities and Colleges Admissions Service) for full-time undergraduate degree programmes at Queen's. The UCAS application deadline for international students is 30 June 2019.
- Applying direct
The Direct Entry Application form is to be used by international applicants who wish to apply directly, and only, to Queen's or who have been asked to provide information in advance of submitting a formal UCAS application. Find out more.
- Applying through agents and partners
The University’s in-country representatives can assist you to submit a UCAS application or a direct application. Please consult the Agent List to find an agent in your country who will help you with your application to Queen’s University.
Fees and Funding
- Applying through UCAS