Much of modern life is made possible on devices and systems that leverage the interaction between software and electronics. The consistent refinement of these interactions has led to advances in both everyday systems, like games consoles and mobile phones, and specialised systems like surveillance, smart vehicles and medical devices.
SESE is one of the few research-led UK university departments that can offer a truly integrated degree and the only computing degree in Queen’s which includes the design of both computing hardware and software.
An SESE graduate could not only design the physical hardware of a mobile phone (electronic engineering) but could write the software to run it (software engineering).
Employer experience is embedded into this course and allows students to engage and learn from prospective employers from day one. Industry placements, company sponsored hackathons and challenges are a core part of the curriculum and vastly improve our graduate’s employability rates.
A truly integrated degree at the fast-moving interface between software and electronics disciplines.
|Introduction||This degree requires three years of full-time study plus an optional year in industry, which is usually taken after Stage 2. Transfer from the BEng degree to the MEng is possible subject to satisfactory performance.|
The programme contains the following themes which may change due to technology and industry needs:
|Stage 1||Embedded Systems |
|Stage 2||Embedded Systems 2 |
Professional Engineering Practice 2
|Stage 2 Optional Courses||Signals & Communication System 2|
Circuits and Control
Architecture and Networks
|Stage 3||Placement Year|
|Stage 4||Project 3 |
Software Engineering 3
|Stage 4 Optional Courses||Agile & Component Based Development using NET|
Information System Security
Digital Systems Architecture and Design
Signal Processing and Communications
Networks & Communication Protocols
Control Systems Engineering
|Large Group Teaching||9 (hours maximum)|
9 hours of lectures
|Medium Group Teaching||6 (hours maximum)|
6 hours of practical classes, workshops or seminars each week
|Personal Study||24 (hours maximum)|
22-24 hours studying and revising in your own time each week, including some guided study using handouts, online activities etc.
The School has a world class reputation for research and provides excellent facilities, including access to major new research centres in Secure Information Technologies, Electronics, Communications and Information Technology and Sonic Arts. A number of modules on the course are closely linked to the research expertise of these centres and evolve and change rapidly to reflect some of the current, emerging and exciting developments in the field.
At Queen’s, we aim to deliver a high quality learning environment that embeds intellectual curiosity, innovation and best practice in learning, teaching and student support to enable student to achieve their full academic potential.
On the BEng in Software and Electronic Systems Engineering we do this by providing a range of learning experiences which enable our students to engage with subject experts, develop attributes and perspectives that will equip them for life and work in a global society and make use of innovative technologies and a world class library that enhances their development as independent, lifelong learners. Examples of the opportunities provided for learning on this course are:
Details of assessments associated with this course are outlined below:
As students progress through their course at Queen’s they will receive general and specific feedback about their work from a variety of sources including lecturers, module co-ordinators, placement supervisors, personal tutors, advisers of study and peers. University students are expected to engage with reflective practice and to use this approach to improve the quality of their work. Feedback may be provided in a variety of forms including:
|A level requirements|
ABB including Mathematics and at least one from Biology, Chemistry, Computing, Digital Technology, Electronics, Further Mathematics, Geography, ICT [not Applied ICT], Physics, Software Systems Development, Technology and Design or Double Award Life & Health Sciences.
|Irish leaving certificate requirements|
H3H3H3H3H3H3/H2H3H3H3H3 including Higher Level grade H3 in Mathematics and a Science subject (see list under A-level requirements)
|BTEC Extended diploma|
A relevant BTEC Extended Diploma with 100 credits at Distinction and 80 credits at Merit. Distinctions will be required in stipulated relevant units
|BTEC Higher Diploma|
Those with good grades in a relevant Higher National Diploma will be considered on their individual merits for entry to Stage 2.
Successful completion of Access Course with 80% in each module.
Must be a relevant Access Course including two modules in Mathematics (Level 3) and two modules in Physics (Level 3).
|Option to transfer|
Transfers between BEng and MEng may be possible at the end of Stage 2.
In addition, to the entrance requirements above, it is essential that you read our guidance below on 'How we choose our students' prior to submitting your UCAS application.
Applications are dealt with centrally by the Admissions and Access Service rather than by the School of Electronics, Electrical Engineering and Computer Science. Once your application has been processed by UCAS and forwarded to Queen's, an acknowledgement is normally sent within two weeks of its receipt at the University.
Selection is on the basis of the information provided on your UCAS form, which is considered by a member of administrative staff from the Admissions and Access Service and, if appropriate, the Selector from the School. Decisions are made on an ongoing basis and will be notified to you via UCAS.
For last year’s intake, applicants for the BEng Honours in Software and Electronic Systems Engineering must have had, or been able to achieve, a minimum of five GCSE passes at grade C or better, to include English Language and Mathematics. However, this profile may change from year to year depending on the demand for places. Selectors will also check that any specific entry requirements in terms of A-level subjects can be fulfilled.
Offers are normally made on the basis of three A-levels. Two subjects at A-level plus two at AS are also considered. Candidates are not normally asked to attend for interview. The offer for repeat candidates is set in terms of three A-levels and may be one grade higher than for first time applicants. Grades may be held from the previous year.
Applicants offering two A-levels and one BTEC Subsidiary Diploma/National Extended Certificate (or equivalent qualification) will also be considered. Offers will be made in terms of performance in individual BTEC units rather than the overall BTEC grade(s) awarded. Please note that a maximum of one BTEC Subsidiary Diploma/National Extended Certificate (or equivalent) will be counted as part of an applicant’s portfolio of qualifications. The normal GCSE profile will be expected.
Applicants offering other qualifications, such as BTEC Extended Diplomas, Higher National Certificates, Higher National Diplomas, the International Baccalaureate, Irish Leaving Certificate or an Access course, will also be considered.
The same GCSE profile is usually expected of those candidates taking a BTEC Extended Diploma and must include GCSE Mathematics at grade C or better. A relevant BTEC Extended Diploma in Engineering (180 credits at Level 3) is required for entry to this degree and must include Level 3 Mathematics for Technicians and Level 3 Further Mathematics for Technicians. Where offers are made, these are currently conditional on successful completion of this Extended Diploma with 100 credits at Distinction and 80 credits at Merit, with Distinctions required in four specified units (40 credits), including Mathematics for Technicians and Further Mathematics for Technicians.
Applicants offering a Higher National Certificate (HNC) will require an appropriate GCSE profile, which must include grade C or better in GCSE Mathematics. A relevant HNC in Engineering is required, including Analytical Methods. Where offers are made for Stage 1 entry, these are currently conditional on successful completion of this HNC with 8 Merits, including Merits in three specified units, including Analytical Methods.
For those offering a Higher National Diploma (HND), some flexibility may be allowed in terms of GCSE profile, but this must include grade C or better in GCSE Mathematics. To be eligible for an offer, the grades obtained in the first year of the HND must allow the overall offer to be achievable. A relevant HND in Engineering is required for admission to this degree and offers for Stage 1 entry are currently conditional on successful completion of this HND with 9 Merits and 7 Passes overall, with Merits required in three specified units, including Analytical Methods. Applicants with sufficiently high grades in the first year of a relevant HND in Engineering may be considered for entry to Stage 2 and, where offers are made, these are currently conditional on successful completion of this HND with 12 Merits and 4 Passes overall, with Merits required in four specified units, including Analytical Methods and Further Analytical Methods.
Candidates offering a suitable Access/Certificate in Foundation Studies course will be considered individually on their own merits. The Access course should have substantial Mathematics and Science (i.e. Physics and/or Chemistry) content. Where offers were made last year, these were conditional on successful completion of this Access course with 80% in each module.
The information provided in the personal statement section and the academic reference together with predicted grades are noted but these are not the final deciding factors in whether or not a conditional offer can be made. However, they may be reconsidered in a tie break situation in August.
A-level General Studies and A-level Critical Thinking are not normally considered as part of a three A-level offer and, although they may be excluded where an applicant is taking four A-level subjects, the grade achieved could be taken into account if necessary in August/September.
If you are made an offer then you may be invited to an Open Day, which is usually held during the second semester. This will allow you the opportunity to visit the University and to find out more about the degree programme of your choice; the facilities on offer. It also gives you a flavour of the academic and social life at Queen's.
If you cannot find the information you need here, please contact the University Admissions and Access Service (email@example.com), giving full details of your qualifications and educational background.
For information on international qualification equivalents, please check the specific information for your country.
An IELTS score of 6.0 with a minimum of 5.5 in each test component or an equivalent acceptable qualification, details of which are available at: http://go.qub.ac.uk/EnglishLanguageReqs
If you need to improve your English language skills before you enter this degree programme, INTO Queen's University Belfast offers a range of English language courses. These intensive and flexible courses are designed to improve your English ability for admission to this degree.
INTO Queen's offers a range of academic and English language programmes to help prepare international students for undergraduate study at Queen's University. You will learn from experienced teachers in a dedicated international study centre on campus, and will have full access to the University's world-class facilities.
These programmes are designed for international students who do not meet the required academic and English language requirements for direct entry.
INTO - English Language Course(QSIS ELEMENT IS EMPTY)
Highly skilled graduates with experience of both software and electronics are highly sought-after locally, nationally and internationally. There are excellent, well-paid career prospects across a wide spectrum: design, research, development, production, marketing and sales in employment areas such as avionics and space, telecommunications and broadcasting, connected health and medical electronics, consumer electronics and gaming, computing and software, embedded systems and electronic security.
Graduates from these courses will be well equipped to undertake research or further study in a wide range of Electronic Engineering or Computer Science fields
Additional Awards Gained(QSIS ELEMENT IS EMPTY)
Prizes and Awards(QSIS ELEMENT IS EMPTY)
In addition to your degree programme, at Queen's you can have the opportunity to gain wider life, academic and employability skills. For example, placements, voluntary work, clubs, societies, sports and lots more. So not only do you graduate with a degree recognised from a world leading university, you'll have practical national and international experience plus a wider exposure to life overall. We call this Degree Plus. It's what makes studying at Queen's University Belfast special.
|Northern Ireland (NI)||£4,275|
|England, Scotland or Wales (GB)||£9,250|
|Other (non-UK) EU *||£4,275|
Tuition fees for 2020-21 have not been set. Those quoted above are for students commencing study in 2019-20. These will be subject to an increase for students commencing study in 2020-21.
Tuition fee rates are calculated based on a student’s tuition fee status and generally increase annually by inflation. How tuition fees are determined is set out in the Student Finance Framework.
* The tuition fees that EU students starting courses at UK universities following the agreed transition period are required to pay will depend on what is agreed as part of the UK's exit negotiations. Please refer to www.qub.ac.uk/brexit
Depending on the programme of study, there may be extra costs which are not covered by tuition fees, which students will need to consider when planning their studies.
Students can borrow books and access online learning resources from any Queen's library.
If students wish to purchase recommended texts, rather than borrow them from the University Library, prices per text can range from £30 to £100. A programme may have up to 6 modules per year, each with a recommended text.
Students should also budget between £30 to £75 per year for photocopying, memory sticks and printing charges.
Students undertaking a period of work placement or study abroad, as either a compulsory or optional part of their programme, should be aware that they will have to fund additional travel and living costs.
If a final year includes a major project or dissertation, there may be costs associated with transport, accommodation and/or materials. The amount will depend on the project chosen. There may also be additional costs for printing and binding.
Students may wish to consider purchasing an electronic device; costs will vary depending on the specification of the model chosen.
There are also additional charges for graduation ceremonies, examination resits and library fines.
Software and Electronic Systems Engineering (with Year in Industry) costs
Students may wish to become a student member of the British Computer Society at an annual cost of £37.
Students undertake a placement in year 3 and are responsible for funding travel, accommodation and subsistence costs. These costs vary depending on the location and duration of the placement. Students may receive payment from their placement provider during their placement year.
There are different tuition fee and student financial support arrangements for students from Northern Ireland, those from England, Scotland and Wales (Great Britain), and those from the rest of the European Union.
Information on funding options and financial assistance for undergraduate students is available at http://www.qub.ac.uk/Study/Undergraduate/Fees-and-scholarships/.
Each year, we offer a range of scholarships and prizes for new students. Information on scholarships available.
Information on scholarships for international students, is available at http://www.qub.ac.uk/International/International-students/International-scholarships/.
How to Apply
Application for admission to full-time undergraduate and sandwich courses at the University should normally be made through the Universities and Colleges Admissions Service (UCAS). Full information can be obtained from the UCAS website at: www.ucas.com/apply.
When to Apply
UCAS will start processing applications for entry in autumn 2020 from 1 September 2019.
Advisory closing date: 15 January 2020 (18:00).
Late applications are, in practice, accepted by UCAS throughout the remainder of the application cycle, but you should understand that they are considered by institutions at their discretion, and there can be no guarantee that they will be given the same full level of consideration as applications received by the advisory closing date.
Applicants are encouraged to apply as early as is consistent with having made a careful and considered choice of institutions and courses.
The Institution code name for Queen's is QBELF and the institution code is Q75.
Further information on applying to study at Queen's is available at: http://www.qub.ac.uk/Study/Undergraduate/How-to-apply/
After an offer is made this will be notified to applicants through UCAS. Confirmation will be emailed by the Admissions and Access Service and this communication will also include Terms and Conditions (www.qub.ac.uk/Study/TermsandConditions) which applicants should read carefully in advance of replying to their offer(s) on UCAS Track.
Fees and Funding
Queen's University Belfast is committed to Equality, Diversity and Inclusion.
For more information please read our Equality and Diversity Policy.
Queen's University Belfast is registered with the Charity Commission for Northern Ireland NIC101788
VAT registration number: GB 254 7995 11